Essentially used for counting blood cells, the Haemocytometer counting chamber is required for the microscopic manual cell counting of, erythrocytes (RBC, red blood cells), leukocytes (WBC, white blood cells), thrombocytes (PLT, platelets) and also sperm counts. Our Improved Neubauer counting chambers are manufactured to the highest standard in a piece of thermal and shock-resistant glass.
Neubauer Improved Haemacytometer Counting Chamber
Haemocytometer Description
An H-shaped moat forms either one or two counting areas, or plateaus. Each plateau features an etched grid or ruling. The ruled surface is either 0.1mm or 0.2mm below the cover glass, limiting the Volume of 1 Square mm of blood or fluid over a square mm at 0.1cu.mm or 0.2cu.mm respectively.
Contact of the flat, polished cover glass surfaces with the cover glass supports produces an exact volume of fluid over the counting area.
The difference in surface tension characteristics between the metallic surface on the chamber and the polished cover glass assures smooth capillarity for precise loading and more even cell distribution.
Spare counting chambers and coverslips are available separately.
In addition, we also supply a new range of disposable glass counting chambers manufactured by Bioanalytic GmbH.
Take a look at our New TIC Product Range…
TIC® is a single-use dilution test system for quick, easy, safe, and highly precise microscopic counting of erythrocytes, leukocytes, thrombocytes and reticulocytes in blood, and also leukocytes in synovial fluid.
The disposable counting chambers are supplied in boxes of 25 and although they are for single-use only, they are manufactured from top-quality glass.
Advantages of Disposable Counting Chambers
• No Cover Glass Required (saves time, improves safety)
• No Cleaning Required (saves time, rapid sequence analysis)
• No Disinfection Required ( no risk of infection)
Product Description
These disposable counting chambers are made from high-quality glass and are used just like conventional counting chambers. The disposable chambers are much easier to handle and significantly reduce the risk of infection through the elimination of cleaning procedures.
Compared to PLASTIC single-use counting chambers no shrinkage (longevity) and higher precision in the manufacture (dimension stability). The Bioanalytics disposable counting chambers are IVD and CE certified.
Specimen
For the count in the disposable counting chamber, any sample material can be used (in dilution), which is also suitable for conventional counting chambers.
Applications
When using disposable counting chambers (particularly for in-vitro diagnostics), the same application rules are valid as for conventional counting chambers, notably, both counting chamber fields must be filled with the same sample and both fields have to be counted.
Bioanalytic disposable counting chambers have, due to their construction, a much lower evaporation rate than conventional counting chambers, because only the two narrow sides are open and the distance to the counting grid is farther.
This makes it possible to do some counts without the use of a humidity chamber when the storage time exceeds not more than five minutes. This prevents water condensation on the surfaces (coverslip top, slide bottom slide).
Overfilling and its consequences, as with conventional counting chambers, are less possible and more clearly visible.
Due to the absence of cleaning steps, there is also no risk of cell damage or lysis by remnants of cleaning detergents.
Slides and disposable counting chambers have nearly the same height. This eliminates complex height adjustment of the object table during the change. This lowers the risk of a lens-slide crash.
Dry-viewed counting chambers may have unusual structures (similar to tree-like branching). These “drying cracks” in the micro-coating of the glass surface disappear after filling and do not affect the counting.
we would like to provide an update regarding ongoing market cost trends and their impact on our pricing.
Global market conditions have continued to drive sustained increases in direct costs, significantly affecting the entire supply chain. As a lot of the products supplied by Vetlab Supplies Ltd are polymer-based plastics derived from oil, fluctuations in oil prices and associated raw material costs have had a direct and considerable impact on production costs.
We have continued to make every effort to absorb these increases and minimise their effect on our customers, however, due to the ongoing nature of these issues, we have no option other than to implement an adjustment to our pricing & discounts on affected products from immediate effect.
Please note this will not apply to existing stock & will only be applied to new stock received at the increased price.
We would also like to emphasise that we will continue to closely monitor raw material and market cost developments. Should conditions improve, we will review our pricing accordingly and consider potential adjustments, including reductions where possible.
